Tagged: Injection Molding

Parker Lord is sharing an on-demand webinar recording about Chemlok® 701 Adhesive, a one-coat product for bonding castable urethanes and thermoplastic polyurethanes (TPUs) to metals. This new adhesive overcomes traditional limitations and provides increased resistance to water and high temperatures. Parker Lord’s JR Nordstrom, Senior Field Technical Representative, and Brian Carney, Senior Principal Scientist, presented the 26-minute webinar.

Join us August 27 – 30 in Barberton, Ohio, for “Manufacturing with Silicone Rubber,” a comprehensive workshop hosted by RDAbbott from a fabricator’s point-of-view. Attendees of this four-day workshop will learn practical techniques, testing methods, and insights, plus equipment troubleshooting tips for processing silicone rubber from industry professionals through a combination of classroom instruction and interactive workshops.

RDAbbott will supply Dow LSR to four liquid injection molding cells at NPE 2024, the plastics industry’s largest event. Two of these cells will also use pigments from NovationSi. This effort demonstrates our commitment to working with industry-leading supplier partners and providing top-notch technical support. RDAbbott also collaborates with manufacturers of injection molding machines, molds, and dosing systems.

Craig Lustek, RDAbbott Application/Business Development Engineer, will present “Liquid Silicone Rubber Basics” at Sodick-Plustech’s NPE 2024 Preview Open House on Thursday, April 11, 2024, in Elk Grove Village, Illinois. This one-day event will give industry professionals an opportunity to preview Sodick-Plustech’s injection molding machines less than a month before NPE 2024 in Orlando, Florida.

We’ve teamed up to share the latest advancements and technologies in silicone and plastic injection molding. This free Open House will take place November 2, 2023, from 10:00 AM – 2:00 PM (ET) at RDAbbott’s facility in Barberton, Ohio. We hope you seize this opportunity to hear from industry-leading experts and gain hands-on experience for optimizing your manufacturing.

In this webinar recording, Dr. Noel Chang, Technical Service and Development Leader for Dow Consumer Solutions, and Dr. Jessica Ding, the Marketing Manager for Dow, introduce SILASTIC™ 9212-50 LSR for sealing that’s compatible with connector housings made of flame-retardant plastics.

Join us August 15 – 18 in Barberton, Ohio, for “Manufacturing with Silicone Rubber,” a comprehensive workshop hosted by RDAbbott from a fabricator’s point-of-view. Attendees of this four-day workshop will learn practical techniques, testing methods, and insights, plus equipment troubleshooting tips for processing silicone rubber, from industry professionals through a combination of classroom instruction and interactive workshops.

In this upcoming webinar, Dr. Noel Chang, Technical Service and Development Leader for Dow Consumer Solutions, and Dr. Jessica Ding, the Marketing Manager for Dow, will describe SILASTIC™ 921X LSR Series for sealing that’s compatible with connector housings made of flame-retardant plastics.

Dow has launched a new series of selective adhesion LSR products for the mobility and transportation industry. SILASTIC™ SA 994X LSRs are primer-less, self-adhesive, and available in standard and self-lubricating versions with a one-to-one mix ratio for two-component injection molding with thermoplastic substrates. These new LSR materials were specifically developed to target adhesion to polybutylene terephthalates (PBT) and polyamides (PA).

RDAbbott is a co-organizer, sponsor, and exhibitor for LSR 2022, the premiere conference about liquid silicone rubber (LSR), which can be used with liquid injection molding (LIM) to produce high-quality silicone parts. This year’s event is scheduled for September 13 – 15, 2022, in Irvine, California, and will include technical presentations by RDAbbott and several of its supplier partners. RDAbbott will also participate in a panel discussion about LSR Processing.