Electrical resistivity is an important property for various EPDM applications, such as wire and cable, battery and fuel cell gaskets, and automotive profiles. To achieve the specified electrical resistivity values in these applications, it is necessary to replace smaller particle size furnace blacks with mineral fillers and/or larger particle size carbon blacks. Join us on June 7, 2023, from 2:00 – 3:00 PM (ET) to hear the results of Cancarb’s technical study that compared blends of hard clay, Thermax® N990, and N550, and evaluated how the size, structure, and surface chemistry of these filler systems impact the insulative and conductive behaviors of the EPDM compounds.
Alpha Technologies is offering an extension for its Premier™ Rubber Process Analyzer (RPA) that can increase safety and reduce costs. Known as “Sub-Zero Technology,” this enhancement can test compounds at temperatures as low as -25°C without the use of liquid nitrogen.
Alpha Technologies has published a study about rubber process analyzers (RPA), viscoelastic properties, and mix quality in a recent Technical Notebook for Rubber News. Authors John Dick and Richard Hanzlik compare the relative advantages of various viscoelastic properties that an RPA can measure. This article is the first in a two-part series by the authors.
The mobility industry is rapidly transforming, driven by the accelerating adoption rate of electric vehicles and the need for more sustainable material science solutions. This 1-hour presentation introduces a new series of selective adhesion liquid silicone rubber from Dow that is targeted to improve efficiency in designing and fabricating various automotive seals.
RDAbbott recently hosted a webinar titled “The ABCs of RDC: Rubber Dispersion Chemicals.” This 25-minute presentation about leading products and new solutions from RDC S.r.l. was livestreamed on March 30, 2023.
Dow has shared a technical presentation about how its optical silicones are advancing new LED applications in automotive lighting, sports stadium lighting, and UV drinking water purification systems. This information-rich resource examines the benefits of using SILASTIC™ Moldable Optical Silicones.
Hallstar is sharing a technical presentation about replacing phthalates with polymeric esters in vinyl foams. Researchers determined that high-quality vinyl foam can be produced using a polymeric ester plasticizer as either a partial replacement or a full replacement for DIDP, a monomeric phthalate plasticizer.
Dow is sharing a technical presentation about how its SILASTIC™ Moldable Optical Silicones are enabling advanced automotive lighting. For example, adaptive driving beam (ADB) technologies use a high-power LED matrix with a silicone primary lens. Rear lamps and indicators use linear LEDs with a silicone coupler and light guide. Dow’s technical presentation also covers material, mechanical, and optical properties.
The mobility industry is rapidly transforming, driven by the accelerating adoption rate of electric vehicles and the need for more sustainable material science solutions. During this webinar you’ll be introduced to a new series of selective adhesion liquid silicone rubber from Dow that is targeted to improve efficiency in designing and fabricating various automotive seals. Join us on Thursday, April 27, 2023, from 10:00 AM – 11:00 AM (ET) for this free webinar.
RDAbbott plans to attend the 2023 Spring Technical Meeting of the Rubber Division, ACS, a division of the American Chemical Society. This year’s event is scheduled for April 25 through April 27 at the Marriott Cleveland East in Warrensville Heights, Ohio, near the popular Beachwood area.
Global Headquarters:
R.D. Abbott Co., Inc. (RDAbbott)
11958 Monarch Street
Garden Grove, CA 92841
Phone: 562.944.5354
Fax: 562.944.5374
